How To Set Up A Infrared Thermometer
LYfTrack IR988 Non-Contact Digital Infrared Thermometer Educational activity Manual
Welcome to use the LyfTrack Infrared Thermometer IR988.
To ensure the accuracy of measurement and prophylactic of use, please read the manual carefully before use.
Production Introduction
The infrared thermometer is a high-quality product, it adopts infrared applied science, each start-upwardly will be cocky-testing to ensure the accurateness of measurement, this infrared thermometer is mainly used to measure the temperature of the forehead of the human torso.
This product can perform accurate and stable temperature measurement. Users simply need to point the probe head on the forehead and press the measurement push, and the torso temperature can be measured chop-chop and accurately in one second.
To ensure the accuracy of measurement and safety of utilize, delight read the manual carefully earlier use.
This product is widely used in schools, customs, hospitals, homes and other places.
Scope of Application
The torso temperature is measured past measuring the man trunk'southward thermal radiation.
Structure and Composition
It consists of a housing, an infrared temperature sensor, a signal receiving processor, buttons, a COB lath, a buzzer, and an LCD display.
Preventive Test
- Before measurement, the infrared thermometer shall be proofread to check the function of each component and go along the good performance of the infrared thermometer.
- Maintain sufficient ability supply to decide whether the external surround is in accordance with the product operating environment.
- Later the product is packed, it is allowed to exist transported past common means of transportation, simply information technology should avoid the mechanical collision of rain, damp and extrusion box.
Statement
The clinical accuracy or the clinical deviation of the infrared thermometer has passed the clinical verification, and its safety and effectiveness meet the requirements of the relevant national laws and regulations. For the claimed performance verification method, please contact our customer service section.
Safety Instructions
This product is intended for use only equally described in the instructions.
The manufacturer shall non exist liable for any damage caused by improper employ.
- Do non immerse this product in water or other liquids. For cleaning, wipe with a damp soft cloth.
- If you remember this production is damaged or abnormal, delight stop using it.
- Do non open this production without permission.
- The blood vessels constrict and the peel surface temperature drops during the early stages of fever, when the measured temperature is unusually low.
- If the measurements do non friction match the patient'south diagnosis or the temperature is abnormally low, the measurements are repeated every 15 minutes or some other core temperature expanse is measure to verify the previous measurements.
- This equipment includes sensitive elements and shall exist treated with caution. The storage and operating weather are described in the Production Specification department.
- This product contains small parts, in order to avoid swallowing, children = need to use nether adult supervision.
Please stay abroad from the following situations:
- Extreme temperature
- Shock and drop
- Pollution and Dust
- Direct sunlight
- Hot and common cold environment
- If it cannot be used for a long fourth dimension, delight remove the battery and place it.
Warning: This device is non a complete substitute for medical handling. It is not waterproof and shall non exist used in liquids.
Construction Introduction
LCD Backlight Color Clarification
n the homo torso manner, the product tin intelligently display the measurement results and prompt with unlike backlight colors, equally follows.
| iii Color LCD Brandish | ||
32.0°C ~ 37.4°C | 37.five°C ~ 37.9°C | 38.0°C ~ 42.nine°C |
Light-green | Orange | RED |
How to Install Batteries
The machine requires 2 DC3V (AAA batteries). When the low voltage icon flashes on the screen, the bombardment needs to be replaced.
Remove the bombardment back comprehend in the direction indicated (Pace i)
Replace the battery, and correctly reprint the bombardment according to the positive and negative poles marked (Footstep 2)
- Concord the unit of measurement and open the bombardment back cover in the management indicated.
- Insert 2 DC3V (AAA batteries) batteries and pay attending to the battery polarity indication.
Battery Replacement Bicycle for Consumables and Description of The Replacement Method
The removable parts of this product mainly include batteries, before installing accessories, please make sure that the accessories specifications and models are consistent with the original manufactory regulations, delight be sure to use the company's specified model accessories, if necessary, please contact the seller or manufacturer'due south contact telephone number.
Battery installation and replacement: When the display appears low voltage prompt symbol, please supplant the special battery. For installation and replacement, please refer to the Instructions for Installation and Use in this manual.
Batteries and electronic equipment shall be tending of in accord with applicable local laws and regulations and shall not exist casually thrown into the garbage to avoid irreversible pollution.
Change Settings
In the ability-on state, long printing the SET push button (SET) for almost two seconds to enter the temperature setting interface, and then press (Set) to switch;
Switching sequence: F1 → F2 → F3 shutdown and relieve.
- F1 interface: Temperature brandish unit of measurement switch, press [+] Plus Sign key and [-] Minus Sign key to modify.
- F2 interface: Adjust the alarm temperature, press [+] Plus Sign primal and [-] Minus Sign key to change the temperature value, college than the temperature value, for red backlight alarm.
- F3 interface: The function setting of speakers on and off, press [+] Plus Sign key and [-] Minus Sign central to modify.
- F4 interface: Overall temperature offset setting, press [+] Plus Sign key and [-] Minus Sign cardinal to modify the temperature beginning value.
- Printing the SET button again to shut down and relieve the modified settings.
Central Operations
| KEY / BUTTON | FUNCTION | Pick one | OPTION two |
| SET | Unit of measurement | C | F |
| – | MODE | Trunk | SURFACE / OBJECT |
| + | Memory | BACKWARD | Forward |
Body Temperature Measurement
This production provides y'all with a method of measuring the frontal temperature, but it cannot replace the md's diagnosis and treatment. In addition, private body temperature is different. Delight use the retentiveness function to understand your normal trunk temperature and use it as a reference for whether the torso temperature rises.
- Point the thermometer to the middle of the brow-above the eyebrow and keep it vertical. The measurement site must not exist covered by hair. The altitude betwixt the thermometer and the forehead is recommended to be between 1 and 5 cm.
- Printing the fundamental to starting time
Note 1: The temperature fashion is the preset mode
Notation ii: The thermometer goes off automatically after turning on
Notation 3: Self-bank check, if an error occurs, it volition display on screen. - bout in 1 2nd, the "trunk temperature" symbol is displayed on the thermometer screen and the measurement result is displayed.
- Automated shutdown in 30 seconds if in idle condition.
Before the measurement, delight confirm that the measured person has non bathed or exercised within xxx minutes, and has been in a stable surroundings for at least five minutes. Three measurements are recommended. If the 3 measurements are different, select the highest temperature value.
Surface Temperature Measurement of Object
This product provides yous with the function of measuring the surface temperature of an object.
- Press the [-] Minus Sign fundamental when the system is turned on and press it again. The LCD displays the graphic symbol "object temperature", which means that it is set to the object temperature measurement style.
- Automated shutdown: Automatic shutdown later about 30 seconds of no performance.
When the thermometer is taken from a place with a large temperature deviation betwixt the environment to be measured, the thermometer should be placed in a new environment for at to the lowest degree 30 minutes earlier measuring.
Retentivity Part
In the ability-on land, press the [+] Plus Sign key to enter the memory value view.
- The greater the value of the retention number, the earlier the measured value, and the smaller the value, the more recent the measured value.
- If there is no memorized value, "————" is displayed.
- The thermometer can shop upward to 50 sets of most recent measured values, and the values of more than l sets are automatically overwritten in chronological order.
Retentiveness Immigration: In the power-on state, printing and concord the [+] Plus Sign cardinal for about 3s, the LED displays "CLr" character, subsequently near 2s the memory deletion is completed.
Maintenance and Precautions
Continue the inner crenel of the sensor and probe clean, otherwise information technology will bear on the measurement accurateness.
Cleaning method:
- Surface Cleaning: Apply a clean soft textile or cotton swab to stick a niggling medical alcohol or water to wipe the clay.
- Sensor and Probe Crenel Immigration: Utilise a clean software cloth or cotton swab with a little medical a the probe cavity or the top of the sensor. Do not employ until the alcohol has completely evaporated.
- Immersion of the thermometer in any liquid is prohibited. Prolonged exposure to excessively high or low temperatures is prohibited.
- Standoff, falling and mixing with precipitous objects are prohibited. Disassembly is prohibited.
- Infrared thermometers shall not be used in sunlight or water.
- Do non use in strong electromagnetic interference environment.
- Place the infrared thermometer out of the reach of children.
- It is recommended that yous practice many times to be familiar with the measurement method and try not to change the ex-manufacturing plant setting.
- The measurements shall not be a substitute for the engineer's diagnosis.
- No special maintenance is required during use. Please contact the seller or manufacturer if at that place is any trouble.
- Delight dispose of the waste and rest at the cease of the life of the product according to the local laws and regulations.
Troubleshooting
| Display Message | Meaning | Possible Cause / Solving Method |
| Hi | The ambient temperature is too high |
|
| Lo Pos | The ambient temperature is too low |
|
| Err | The ambient temperature is likewise loftier | The ambient temperature of the thermometer is higher than 35 ℃ |
| Err | The ambient temperature is too low | The ambient temperature of the thermometer is beneath 16 ℃ |
| POS | Unstable ambient temperature | The ambient temperature is unstable, please place the thermometer on stable surround for more than than 30 minutes |
| Blank Display | Mistake office display | During arrangement cocky-exam, organization failure was constitute, blank screen is displayed. Please remove the battery and reinstall it. |
| Battery | Battery level display | The battery is low, please supersede it with a new one immediately |
Scale and Repair
The accuracy of this infrared thermometer has been strictly tested and information technology is generally recommended that the thermometer be tested and calibrated in one case a yr to ensure proper performance and accuracy.
Please exercise non behave out any maintenance by yourself. If in that location is a quality issue or whatever question nigh the correct measurement of the infrared thermometer, please contact the distributor or manufacturer.
EMC Statement
Note: Non-contact infrared thermometer meets YY0505 electromagnetic compatibility requirements; User shall install and use it according to the electromagnetic compatibility information provided past random files.
Portable and Mobile RF advice devices may affect the performance of infrared thermometers and avert potent electromagnetic interference when used, such as near mobile phones, microwave ovens, etc.;
The Guidance and the manufacturer'south statement are detailed in the annex.
Note: Non-contact infrared thermometers shall non exist used close to or on top of other devices. If they must be used close to or on top of other devices, they shall be observed to verify that they piece of work properly in the configuration in
which they are used.
If the physiological parameters measured by the instrument are less than the specified minimum amplitude, it may lead to inaccurate results.
The employ of extrinsic accessories and cables other than those supplied by the manufacturer of the infrared thermometer every bit internal components may result in increased emission and reduced immunity of the infrared thermometer.
Product Specifications
| Car Type | Infrared Thermometer IR988 |
| Measurement Method | Non-contact |
| Measurement Site | Forehead / Object Surface |
| Measuring Distance | 3~5cm |
| Display Range | Body: 34.8°C~42.5°C Object: 0°C~93°C (±1°C) |
| TEMP Resolution | 0.1°C/°F |
| Max Commanded Fault | 35°C~42.0°C (±0.2°C) Others (±0.3°C) |
| Retention Assortment | 32 Units |
| Operating Surround | Temperature: 16°C~35°C; relative humidity: <80%; Atmospheric pressure: 70kPa~106kPa |
| Transportation and Storage Conditions | Temperature: -20°C~+35°C; relative humidity: <93%; Atmospheric force per unit area: 50kPa~106kPa |
| Machine Standby Role | 30s |
| Power Supply | DC3V (AAA*2) |
| Size | 150x80x41mm |
| Weight | 105.5g |
Warranty and After Sales Support
- This product is used for five years from the date of purchase; yous can relish 1-year complimentary warranty.
- The packaging is non covered by the warranty.
- For the post-obit damage acquired by the user, please forgive us for not providing gratis warranty service;
- Failure caused by unauthorized disassembly and modification.
- Failure caused by adventitious driblet during use or handling;
- Failure caused by not following the correct instructions in the manual;
- Failure caused by lack of reasonable maintenance;
- When requesting to provide free warranty service, you must hold the warranty card filled with the date of buy and the seal of the purchase dealer (including the proper noun and accost of the dealer).
- Repair services exterior the warranty telescopic will be charged co-ordinate to the respective regulations;
- When requesting free warranty service, please have this production to the dealers of our company for repair.
Certificate of Compliance
| CERTIFICATE OF COMPLIANCE | |||
| Product Proper noun | Non-CONTACT | MODEL | IR988 |
| Appointment OF INSPECTION | INSPECTOR | ||
This product has passed the inspection and is immune to leave the factory.
Warranty Card
| WARRANTY CARD | |||
| BATCH NUMBER | Production CODE | ||
| SELLER | Appointment OF Purchase | ||
| CUSTOMER'S NAME | CUSTOMER'South Phone | ||
| Client'South Address | CUSTOMER'S EMAIL | ||
| Error DESCRIPTION | |||
Documents / Resources
Source: https://manuals.plus/lyftrack/ir988-non-contact-digital-infrared-thermometer-manual
0 Response to "How To Set Up A Infrared Thermometer"
Post a Comment